Flex Power Modules released its PKB5213D eighth brick DC-DC including a wide 18-60 V input range to include 24 V and 48 V nominal inputs, and a fully regulated 12 V output rated at 20 A/240 W. The modules are certified to IEC/EN/UL 62368-1 with an isolation of 2250 VDC input to output.

Flex Power Modules will be showcasing new products at the electronica show in Munich in November 2022. One product, which will be launched at the event, will be an 8:1 ratio, 400 W intermediate bus converter with outstanding efficiency and power density figures. The product is non-isolated and unregulated and produces 5 to 7.5 VDC output from a 40-60 VDC input. This matches the trend for 48 V or 54 VDC nominal input voltages and a lower voltage intermediate bus, to enable high efficiency voltage regulator modules to be used. The device has a PMBus™ interface for monitoring and control and is extremely compact in size (27 x 18 x 6.4 mm or 1.06 x 0.71 x 0.25 in).

Flex Power Modules launched its non-isolated and unregulated BMR313 Intermediate Bus Converter (IBC) that provides peak power rating of 3 kW in a 23.4 x 17.8 x 7.65 mm form factor, with 908 W/cm3 power density. The BMR313 carries an input voltage range between 40-60 V, 10-15 V of output with 97.3% efficiency at 54 V input, and continuous output of 1kW. The BMR313 is designed for cold wall mounting and offers the generally used LGA footprint and pinout.

Flex Power Modules adds two new variants to BMR492 series delivering up to 1100 W peak power in an eighth brick.

Flex Power Modules has released the PNA series of non-isolated analog point of load (PoL) regulators with a 9 V to 36 V input voltage range and a full load efficiency of 95.5% at 12 V in and 5.5 V out.

Flex Power Modules announces the PNA series, an analog non-isolated point of load (PoL) regulator offering excellent efficiency and thermal performance.

Flex Power Modules, a manufacturer of DC/DC converters, launched the BMR492 series of digital eighth-brick intermediate bus converters.